4-Nos Hard Chrome Pillars Type Presses

Question 1 :- What are the major applications of these Presses?
Answer :- These Presses are mainly used for following applications.

• Trimming
• Forming
• Pressing
• SMC/DMC Mouldings
• Drawing
• Sheet Metal applications. Etc.

Question 2:- What are the major advantages of 4-Pillars type Presses?
Answer :-

• Better Alignment between slide & Bolster Platen.
• Tie rods provide some overload Protection.
• Deflection is less at 100% load.
• Better parallelism accuracies between slide & Bolster.
• Daylight can be Adjusted as per the requirement of the applications.

Question 3:- What Safety Standards are generally followed by SANTEC While designing Hydraulic Presses?
Answer :- All hydraulic Presses are designed as per following Safety Standards:-

• ANSI standard B11.1
• CE Standards for operator's Safety

Question 4:- What is the lead time for these Presses?
Answer :- Delivery time for these Presses depends on Capacity & size of the press. Normal delivery time for 5 to 400 tons Capacity Presses is 2 to 4 months & for higher tonnage Presses delivery time is 6 months to 10 months.

Question 5:- What is warranty period for these Presses?
Answer :- Each 'santec' machine is having warranty for 12 months from the date of dispatch from our Premise

Question 6:- Custom – Built Presses Can also be manufactured by Santec?
Answer :- “Yes” Santec manufacture Custom – built Presses to as per customer's specifications & requirement. Special purpose machines are also manufactured by SANTEC..

Question 7:- Can Santec arrange CE – Certifications Prior to the dispatch of the equipment?
Answer :- Some of the machines are CE – Marked but Not all of them. In case European Customer need CE- certified Presses/ Equipment. Then Santec will arrange CE- Certified on Extra Cost basis for the equipments prior to the dispatch

Question 8:- How much time it takes to get CE – Certification?
Answer :- To get CE – Certified for the equipments, the Local agency takes 45 to 60 Days time is issue CE- Certificate.

Question 9:- Is CSA – approval is necessary for Electrical Control Panel of any machine entering to Canada?
Answer :- Yes, it is necessary & SANTEC has close links with Local CSA – Agency in India & Can be arranged on Extra Cost basis prior to the dispatch from CSA – Agency.

Question 10:- What are the Geometrical accuracies maintained in each SANTEC Hydraulic Presses?
Answer :- All machines are designed as per following standards:-

• Accuracies:- As per JIS Standards, Grade I & II
• Safety factors:- 20 to 30%
• Raw material / M.S. Plates as per:- IS 60-62 Grade
• Hydraulic Cylinders are made by Seamless tubes Confirming IS 2062-226 duly ultrasonically & X- Ray Passed.
• Chilled Cost Ram Surface hardness is 500 to 550 BHN
• Electrical Central Panel/ Electricals as per
  • BIS: 85 44 & Electrical Motors Confirm to
  • BIS 325 & IP 55 enclosure.