Question 1 :- What are the major
applications of these Presses?
Answer :- These Presses are used extensively for Production
applications for which good slide & bed alignment is essential for
accuracy. Their rigid construction permits off-center loading
Operations in which these Presses are used are:-
- Blanking
- Punching
- Forming
- Deep Drawing
- Mouldings
Question 2:- What Safety Standards are generally
followed by SANTEC While designing Hydraulic Presses?
Answer :- All hydraulic Presses are designed as per following Safety
Standards:-
- ANSI standard B11.1
- CE Standards for operator's Safety
Question 3:- What is the maximum Pressing Capacity
of these Presses?
Answer :- These are available with single or two-point (Connections)
Suspensions, having one or two cylinders, & may be single, double or
triple acting. Force Capacities generally range from 50-5000 tons (0.4 to
44.5 MN) for conventional metal forming & blanking operations to 85,000
tons (756.5 MN) for not forging.
Question 4:- What is the lead time for these Presses?
Answer :- Delivery time for these Presses depends on Capacity &
size of the press. Normal delivery time for 5 to 400 tons Capacity Presses
is 2 to 4 months & for higher tonnage Presses delivery time is 6 months
to 10 months.
Question 5:- What is warranty period for these Presses?
Answer :- Each 'santec' machine is having warranty for 12 months
from the date of dispatch from our Premise
Question 6:- Custom – Built Presses Can also be
manufactured by Santec?
Answer :- “Yes” Santec manufacture Custom – built
Presses to as per customer's specifications & requirement. Special
purpose machines are also manufactured by SANTEC..
Question 7:- Can Santec arrange CE – Certifications
Prior to the dispatch of the equipment?
Answer :- Some of the machines are CE – Marked but Not all of
them. In case European Customer need CE- certified Presses/ Equipment. Then
Santec will arrange CE- Certified on Extra Cost basis for the equipments
prior to the dispatch
Question 8:- How much time it takes to get CE –
Certification?
Answer :- To get CE – Certified for the equipments, the Local
agency takes 45 to 60 Days time is issue CE- Certificate.
Question 9:- Is CSA – approval is necessary for
Electrical Control Panel of any machine entering to Canada?
Answer :- Yes, it is necessary & SANTEC has close links with
Local CSA – Agency in India & Can be arranged on Extra Cost basis
prior to the dispatch from CSA – Agency.
Question 10:- What are the Geometrical accuracies
maintained in each SANTEC Hydraulic Presses?
Answer :- All machines are designed as per following standards:-
- Accuracies:- As per JIS Standards, Grade I & II
- Safety factors:- 20 to 30%
- Raw material / M.S. Plates as per:- IS 60-62 Grade
- Hydraulic Cylinders are made by Seamless tubes Confirming IS 2062-226
duly ultrasonically & X- Ray Passed.
- Chilled Cost Ram Surface hardness is 500 to 550 BHN
- Electrical Central Panel/ Electricals as per
- BIS: 85 44 & Electrical Motors Confirm to
- BIS 325 & IP 55 enclosure.
© Santec Exim Private Limited. All Rights Reserved (Terms
of Use)
